This collection contains original and master videos documenting Wilson Greatbatch, inventor of the Cardiac Pacemaker. Greatbatch demonstrates the circuitry of his implantable pacemaker and discusses his life as an inventor.
Scope and Contents note:
This collection consists of approximately 2 hours of original (BetaCam SP) video recordings and reference (viewing) copies (VHS) documenting Wilson Greatbatch's presentation about the invention of the cardiac pacemaker. Dr. Greatbatch demonstrates the circuitry of his implantable pacemaker and discusses his life as an inventor.
Arrangement:
Collection is arranged into three series.
Series 1: Original Videos
Series 2: Master Videos
Series 3: Reference Videos
Series 4: Photographs and Slides
Biographical/Historical note:
Wilson Greatbatch was born in Buffalo, New York in 1919. He received his bachelor's degree in electrical engineering from Cornell University in 1950 and his master's degree from the State University of New York (SUNY) at Buffalo in 1957. Greatbatch first learned of heart block in 1951. He knew that a pacemaker could cure it, but he couldn't build one small enough to be implanted with the materials then available. Conducting research and experiments in a workshop in the barn behind his house in upstate New York, Greatbatch invented in 1958, the device that has saved hundreds of thousands of lives over the years. In 1970, he founded Wilson Greatbatch, Ltd. (WGL), to develop and manufacture reliable, long lived batteries for the implantable pacemaker. WGL produced the first lithium iodine battery for implantable pacemakers in 1972. In addition to numerous honors and awards, Greatbatch was inducted into the National Inventors Hall of Fame in 1986.
Provenance:
This collection was created by the Innovative Lives Program of The Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation on October 8, 1996. The Innovative Lives series brings young people and American inventors together to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Janese Swanson developed video game software, a website, and an array of toys and gadgets aimed at making technology more accessible to girls. The collection contains approximately six hours of original and reference video footage of Swanson's Innovative Lives Presentation, in which she discussed her background and demonstrated her inventions with her daughter, Jackie. The material also includes a brief interview.
Scope and Contents:
This collection contains six (6) hours of original (BetaCam SP) recordings, six (6) hours of master (BetaCam SP) recordings, and six (6) hours of reference (VHS) copies documenting the life and work of Dr. Janese Swanson, inventor of toys, books, a website, magazine, and software. This video documentation was created on March 25, 1998. The recordings include a presentation by Swanson for the Lemelson Center's Innovative Lives Program. Audience participants are students from Thoreau Middle School (Vienna, Virginia), Options Charter School (Washington, D.C.), Carrollton Elementary School (New Carrollton, Maryland), and Rosa Parks Middle School (Olney, Maryland). The collection also contains a brief interview with Dr. Swanson.
Arrangement:
The collection is organized into three series.
Series 1, Original Videos, 1998
Series 2, Master Videos, 1998
Series 3, Reference Videos (viewing copies), 1998
Series 4, Photographs and Slides, 1998
Biographical / Historical:
Janese Swanson, a native of California, was the founder and CEO of Girl Tech (1995), a company created to bring girls into the world of technology. The second of six children, Swanson was raised by her mother after her father died in the Vietnam War. From a young age, Swanson had an interest in technology, often tinkering with household appliances. Building on her experience as a flight attendant and school teacher, Swanson served on the team at Broderbund Software that developed the video game Where in the World Is Carmen Sandiego? She produced Playroom and Treehouse, early learning software, and has developed award-winning curricula, electronic toys, and books that encourage girls to explore technology and inventions. Some of Swanson's toy inventions include the Snoop Stopper Keepsake Box, Me-Mail Message Center, Zap N' Lock Journal, YakBak, and Swap-It Locket. Her publications include Tech Girl's Internet Adventures, Tech Girl's Activity Book, and Girlzine: A Magazine for the Global Girl. Swanson received her Ed.D. in Organization and Leadership Technology in 1997 from the University of San Francisco.
The Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation was founded in 1995 at the Smithsonian Institution's National Museum of American History through a generous gift from the Lemelson Foundation. The Center's mission is to document, interpret, and disseminate information about invention and innovation; to encourage inventive creativity in young people; and to foster an appreciation for the central role invention and innovation play in the history of the United States. The Innovative Lives series brings together museum visitors and, especially, school aged children, and American inventors to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product. This collection was recorded by the Innovative Lives Program of the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation.
Provenance:
The collection was transferred to the Archives Center by the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation in 1998.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning intellectual property rights. Archives Center cost-recovery and use fees may apply when requesting reproductions. Copies of oral history releases on file.
Mike Augspurger was born in 1956 in Fort Wayne, Indiana. Working with steel land titanium, he invented an all terrain rear wheel drive handcycle. Collection contains approximately eight hours of video footage documenting Augspurger discussing his life and work and a promotional video titled One-Off Handcycle.
Scope and Contents:
This collection contains seven (7) hours of original (BetaCam SP) recordings and eight (8) hours of reference (viewing) copies documenting the life and work of Mike Augspurger, inventor of the One-Off All Terrain Handcycle. The recordings include a presentation by Augspurger for the Lemelson Center's Innovative Lives Program. Audience participants are students from Jefferson Junior High School (Washington, D.C.), Nysmith School (Herndon, Virginia), Nicholas Orem Middle School (Hyattsville, Maryland), and Rosa Parks Middle School (Olney, Maryland). The collection also contains interviews with Leni Fried, Augspurger's wife, and Provi Morillo, an owner of a One-Off Handcycle.
Arrangement:
The collection is organized into three series.
Series 1, Original Videos, 2000
Series 2, Reference Videos (viewing copies), 1998; 2000
Series 3, Supplemental Documentation, 2001
Biographical / Historical:
Mike Augspurger (1956-) was born and raised in Fort Wayne, Indiana, where he built, modified, and raced bicycles, motorcycles, and go-karts from a young age. He attended motorcycle mechanic school at the Indiana Institute of Technology and received his B.A. from Hampshire College in 1981. Augspurger founded Merlin Metalworks in 1987 with business partners and began using titanium to manufacture bicycle frames because of its flexibility, corrosion resistance, and lightweight nature. It was his friendship with neighbor Bob Hall, a wheelchair racing athlete, which prompted him to create an all terrain arm-powered cycle. He founded One-Off Titanium, Inc., to design, manufacture, and custom-build handcycles in 1989.
The Jermone and Dorothy Lemelson Center for the Study of Invention and Innovation was founded in 1995 at the Smithsonian Institution's National Museum of American History through a generous gift from the Lemelson Foundation. The Center's mission is: to document, interpret, and disseminate information about invention and innovation; to encourage inventive creativity in young people; and to foster an appreciation for the central role invention and innovation play in the history of the United States. The Innovative Lives series brings together museum visitors and, especially, school-aged children and American inventors to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product. This collection was recorded by the Innovative Lives Program of the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation.
Provenance:
This collection was recorded by the Innovative Lives Program of the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation on May 5, 2000. The Innovative Lives series brings Museum visitors and American inventors together to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product.
Restrictions:
The collection is open for research use. Series 1, Original Videos, 2000, is stored off-site and may not be used by researchers. Gloves must be worn when handling unprotected photographs and negatives.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. The Archives Center does not own rights to the promotional video One-Off Handcycle. Reproduction permission and fees from the Archives Center may apply. Copies of releases on file.
Inventor Tadeusz Sendzimir, a Polish immigrant, designed and installed the first "Z" Mill for cold rolling stainless steel in the United States. The videohistory documents the story of a new approach to the rolling process of steel technology transfer and consumer demand for a new product;video documents the mill in operation and interviews with active and retired workers.
Arrangement:
The collection is divided into three series.
Series 1: Original Videotapes, 1996
Series 2: Master Videotapes, 1996
Series 3: Reference Videotapes, 1996
Biographical / Historical:
Tadeusz Sendzimir, a Polish émigré, came to the United States in 1939 to work at Armco Steel in Middletown, Ohio. Sendzimir had earlier developed radical processes for galvanizing steel (1931) and cold rolling steel (1933). Sendzimir's rolling process departed dramatically from the multi-stand continuous process developed by John Tytus Armco (1924). Instead of using multi-stand four high rolls Sendzimir's mill used a clustered nest of rolls, like two inverted pyramids (1-2-3-4 configuration). A few Sendzimir Mills were built in Europe before WW II stopped construction of experimental steel plants. While Sendzimir was working at Armco, Signode Steel in Chicago ordered on of his "Z" Mills (Sendzimir Mills are called "Z" Mills in the United States). Signode used the mill to successfully roll low carbon steel for strapping and more importantly for rolling ultra thin silicon steel (for radar units) during WW II.
Stainless steel, first developed around 1915, is made by alloying carbon steel with chromium to make a metal that is highly resistant to corrosion. Stainless steel is relatively hard and is difficult to weld, cut, or drill. The physical properties of stainless steel are important to understanding why the "Z" mill has been so successful. Stainless steel was traditionally rolled in sheets on a four high reversing mill (with a Z mill much larger strips forming rolls can be made). Because stainless steel work hardens quickly it cannot be run through a multi-stand mill easily. One advantage of the a Z mill is that the small work rolls provide a sharper bite, greater pressure, and less roll deflection than a four high mill and thus can roll stainless top gage without having to anneal (soften) the roll.
For more on Sendzimir as an inventor see Steel Will: The Life of Tad Sendizmir, Hippocrene Books, New York, 1994 and by Vanda Sendzimir or "My Father the Inventor" in Invention and Technology, Fall 1995, p. 54-63 also by Vanda Sendzimir.
Related Archival Materials:
Mill's central control pulpit in collection of the Division of History of Technology (now Division of Work and Industry).
Provenance:
Created by the Lemelson Center for the Study of Invention and Innovation and Peter Liebhold of the Division of History of Technology in December 1996.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions.
Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation. Search this
Extent:
0.5 Cubic feet
Type:
Collection descriptions
Archival materials
Interviews
Oral history
Videotapes
Photographs
Date:
1997 September 17
Summary:
Collection consists of original, master, and reference videos documenting Nathan Kane, inventor of Pass-It-Football, a remote control for television, Project-A-Sketch opaque projector for children and low distortion bellows folds for industrial machines.
Scope and Contents note:
This collection contains original, master, and reference videos documenting Nathan Kane, inventor of low-distortion bellow folds for industrial machines, the Pass-It television remote control, and the Project-A-Sketch opaque projector for children. This video was created on September 17, 1997.
Arrangement:
The collection is divided into four series.
Series 1: Original Videos
Series 2: Master Videos
Series 3: Reference Videos
Series 4: Photographs and Slides
Biographical/Historical note:
Nathan Kane (1969-), is an inventor of several inventions that range from toys to industrial equipment. As a graduate student at the Massachusetts Institute of Technology (MIT), Kane won the Lemelson-MIT Student Prize in 1997, for his inventiveness. The Lemelson-MIT Prize honors distinguished careers in invention each year. Kane's invention of an ultra-low distortion bellow fold patterns allow extremely light-weight, structurally rigid, long-extending bellows to be made inexpensively from a single sheet of foldable plastic. Traditional bellows, by comparison, are much heavier and more expensive to manufacture, because they consist of a complex assembly of fabric layers sewn to stiffening panels. Kane's folded patterns have many applications, such as making collapsible containers, expandable shelters, low cost pumps, and low cost protective bellows for industry. The increased extending ability means two to three times less material is needed for production, which cuts cost. The bellow is also two to three times lighter and more compact when folded, allowing machines that use the bellow to move further and, for precision applications, more accurately. Kane also invented the Pass-It television remote. This television remote is built into a foam rubber football so viewers can pass the remote with ease. Another invention is the Project-A-Sketch--a projector intended for children and which displays art or solid objects onto a wall.
Provenance:
This collection was created by the Innovative Lives Program of The Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation on September 17, 1997. The Innovative Lives series brings young people and American inventors together to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions. Signed copies of releases on file.
Approximately 5-1/2 hours of video footage documenting an interview with Dr. William Phillips, a physicist and Nobel Laureate (Physics, 1997). Phillips discusses his background, work at the National Institute of Standards (NIST) using laser light to cool gases to the lowest temperature ever achieved, and his memories of winning the Nobel Prize.
Scope and Contents:
This collection contains approximately 5-1⁄2 hours of original (digital), master (BetaCam SP), and reference videos (VHS) documenting William Phillips, physicist and Nobel Laureate (Physics, 1997). Audience participants are students from Ormond Stone Middle School (Centreville, Virginia); Queen Anne School (Upper Marlboro, Maryland); Nysmith School (Herndon, Virginia): and Gwynn Park Middle School (Brandywine, Maryland).
Arrangement:
The collection is organized into three series.
Series 1, Original Videos, 2001
Series 2, Master Videos, 2001
Series 3, Reference Videos, 2001
Biographical / Historical:
Dr. William Phillips was born November 5, 1948 in Wilkes-Barre, Pennsylvania. He received his B.S. from Juniata College in 1970 and his Ph.D. from the Massachusetts Institute of Technology (MIT) in 1976. Phillips was awarded the Chaim Weizmann Fellowship at MIT to work on collisions and Bose-Einstein condensation (BEC) in spin-polarized hydrogen. After leaving MIT in1978, Phillips joined the National Bureau of Standards (NBS) which was renamed the National Institute of Standards and Technology (NIST). At NIST, Phillips worked on precision measurements of the proton gyromagnetic ratio and of the Absolute Ampere. Also, he pursued laser cooling experiments which led him and colleagues Steve Chu and Claude Cohen-Tannoudji to win the Nobel Prize for Physics in 1997.
The Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation was founded in 1995 at the Smithsonian Institution's National Museum of American History through a generous gift from the Lemelson Foundation. The Center's mission is: to document, interpret, and disseminate information about invention and innovation; to encourage inventive creativity in young people; and to foster an appreciation for the central role invention and innovation play in the history of the United States. The Innovative Lives series brings together museum visitors and, especially, school aged children, and American inventors to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product. This collection was recorded by the Innovative Lives Program of the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation.
Related Materials:
Materials in the Archives Center
Nobel Voices Video History Project (AC0771)
Provenance:
Transferred to the Archives Center by the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation, May 17, 2001.
Restrictions:
The collection is open for research use.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions. Signed releases on file.
This collection consists of approximately 5 hours of original, master and reference video footage and photographs, documenting Thomas H. Massie and James McLurkin in 1995 and 1997. Massie invented the Phantom Haptic Interface, an electronic device giving existing computer technology the ability to simulate the sense of touch. James McLurkin invented a community of microrobotic ants that detect food, pass messages, and pick up small objects. Both inventors discuss their inventions and potential applications, as well as their backgrounds and experience as student inventors.
Arrangement:
The collection is divided into four series.
Series 1: Orginal Videos
Series 2: Master Videos
Series 3: Reference Videos
Series 4: Photographs
Biographical / Historical:
Thomas Massie was born in West Virginia in 1969 and grew up in Vanceburg, Kentucky. He graduated from Massachusetts Institute of Technology (MIT) in 1993 with a Bachelors of Science in Electrical Engineering and a masters in Mechanical Engineering in 1995. AT MIT's Artificial Intelligence (AI) Laboratory Massie developed, with his adviser J. Kenneth Salisbury, a principal research scientist at the AI Lab, and later built, a prototype system that provides users with surprisingly vivid tactile impressions of nonexistent virtual objects. Massie's invention is called the Phantom Haptic Interface. In August of 1993, Massie and Salisbury established SensAble Devices Inc., in Cambridge, MA to manufacture the arm. Massie later changed the name of the company to SensAble Technologies.
James McLurkin was raised in Baldwin, New York and graduated from the Massachusetts Institute of Technology (MIT) in 1995 with a Bachelors degree in Electrical Engineering and Computer Science. McLurkin built upon the earlier work of robot communities. Each robot is essentially identical to Cleo, a micro-robot he designed that was once considered as a basis for a remote-controlled colon surgery device. Each robot ant has a pair of tiny treads powered by a battery and two motors taken from vibrating beepers. The robots are guided away from the objects they hit and toward illumination sources by antennae and light sensors, and they also have mandibles powered by a third motor to pick up bits of food--quarter inch balls of crumpled brass.
Provenance:
This collection was created by the Innovative Lives Program of The Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation on October 27, 1995. The Innovative Lives series brings young people and American inventors together to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions.
Signed releases on file, but releases not available for Western School students.
Dr. Patricia Bath was born in 1942 in New York. She conceived of the Laserphaco Probe in 1981 and patented it in 1988 (US Patent # 4,744,360 for an "Apparatus for ablating and removing cataract lenses"). The collection contains original and reference video footage of Dr. Bath's Innovative Lives Presentation documenting her work in the field of ophthalmology and her work creating and patenting the LaserPhaco Probe, an instrument to remove cataracts. Also included is an interview with Dr. Bath at her home in Los Angeles and an interview with her daughter, Eraka Bath and supplemental documentation assembled by Dr. Bath. The documentation includes photocopies of articles, patents, biographical sketch material, and selected publications and references to related to lasers and surgery of Dr. Bath
Scope and Contents:
This collection consists of 8.5 hours of original (BetaCam SP) video recordings and reference (viewing) copies (VHS) documenting the life and career of Dr. Patricia Bath. The recordings include a presentation by Dr. Bath for the Lemelson Center's Innovative Lives Program and interviews at her home and laboratory in Los Angeles. The collection also includes an interview with Dr. Bath's daughter, Eraka Bath, and copies of footage from other sources about Dr. Bath's work. Additionally, there is supplemental documentation assembled by Dr. Bath. The documentation includes photocopies of articles, patents, biographical sketch material, and selected publications and references to related to lasers and surgery of Dr. Bath.
Arrangement:
This collection is arranged into three series.
Series 1, Original Videos, 2000
Series 2, Reference Videos, 2000
Series 3, Supplemental Documentation
Biographical / Historical:
Dr. Patricia Bath (1942-) was born in New York. She attended Charles Evans Hughes High School, Hunter College (B.A. 1964), and Howard University College of Medicine (M.D. 1968). Bath held a fellowship in ophthalmology at Columbia University (1969-1970) and an internship at New York University (1970-1973) where she was the first African American resident in ophthalmology. Dr. Bath later joined the faculty of UCLA and Charles R. Drew University in surgery and ophthalmology and later the Department of Ophthalmology at UCLA's Jules Stein Eye Institute. In 1976, Dr. Bath and other colleagues formed the American Institute for the Prevention of Blindness (AIPB). Dr. Bath conceived of the Laserphaco, an instrument to remove cataracts in 1981. She received US patent #4,744,360 for an "Apparatus for ablating and removing cataract lenses" on May 17, 1988. Later patents include a method and apparatus for ablating and removing cataract lenses; laser apparatus for surgery of cataractous lenses; and pulsed ultrasound method for fragmenting/emulsifying and removing cataractous lenses. Dr. Bath retired from the UCLA Medical Center in 1993 to work in telemedicine, the use of electronic communication to provide medical services to remote areas where healthcare is limited.
The Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation was founded in 1995 at the Smithsonian Institution's National Museum of American History through a generous gift from the Lemelson Foundation. The Center's mission is: to document, interpret, and disseminate information about invention and innovation; to encourage inventive creativity in young people; and to foster an appreciation for the central role invention and innovation play in the history of the United States. The Innovative Lives series brings together Museum visitors and especially, school age children, and American inventors to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product. This collection was recorded by the Innovative Lives Program of the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation.
Related Materials:
An anatomical eye (accession # 2000.0038.01) was donated to the Division of Medicine and Science in 2000 by Dr. Patricia Bath.
Provenance:
This collection was recorded by the Innovative Lives Program of The Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation on March 1, 2000. The Innovative Lives series brings Museum visitors and American inventors together to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions.
Collection documents Robert Studebaker, inventor of the LaserPlane, the first modern alternative to the liquid level. The first model was introduced in 1965.
Arrangement:
Divided into 3 series: (1) Original videos; (2) Master videos; (3) Reference videos.
Related Archival Materials:
LaserPlane models located in NMAH Division of Science, Medicine and Society (now Division of Medicine and Science).
Provenance:
Created by the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation, National Museum of American History, 1998.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.Collection is open for research.
This collection contains original, master, and reference videos documentingSubhendu Guha, inventor of the solar shingle.
Scope and Contents:
This collection contains original, master, and reference videos and photographs and transcripts for select footage from the Subhendu Guha Innovatibve Lives Presentation.
Arrangement:
Collection divided into three series.
Series 1: Original videos, 1998
Series 2: Master videos, 1998
Series 3: Reference videos, 1998
Series 4: Photographs, 1998
Biographical / Historical:
Subhendu Guha was born in Calcutta, India. He studied physics at Presidency College and later did graduate work at the University of Calcutta. Guha earned his Ph.D from the University of Calcutta in 1968 and joined the Tata Institute of Fundamental Research in Bombay, India. At the Tata Institute, Guha investigated certain properties of semiconductors. He became interested in the use of semiconductors to convert sunlight into electricity. The conversion of sunlight to electricity is known as photovoltaics. Guha's concern for environmental and societal problems led him to focus on amorphous silicon, an element found in sand that can be applied as a thin film to produce photovoltaic material. This research led Guha to add hydrogen in the production process, which made a more useful amorphous silicon . Practical applications for Guha's work led him to Energy Conversion Devices (ECD) in the United States. ECD promoted the use of solar energy for a variety of applications. Ultimately, Guha joined an ECD joint company, United Solar Systems to manufacture solar cells. His research led him to produce a photovoltaic panel that is seven feet long and a foot wide, is lightweight, flexible, rugged, durable, and is easy to install with conventional panels. The panels were innovative because of their design, materials, and production process. Manufacturing begins with stainless steel that is washed to remove surface dirt. Two layers of reflective coating are then applied followed by layers of amorphous silicon and amorphous silicon-germanium alloys. Each layer absorbs a different photon-energy wave length. The panels can be mounted on a roof with nails. Wires are then dropped from the panels into a building where they are hooked to the buildings electrical boxes to channel energy to circuits. The flexible solar shingle is manufactured by United Solar Systems Corporation of Troy, Michigan.
Provenance:
This collection was created by the Innovative Lives Program of the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation on October 21, 1998. The Innovative Lives series brings young people and American inventors together to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions.
Primarily audiotapes, sheet music, and photographic images. Also: correspondence, newspaper clippings, magazine articles, itineraries, awards, and ephemera.,Of particular interest are recordings or photographic images, including the personalities listed below, and President and Mrs. Tubman of Liberia; also, two interviews and three recordings of Cat Anderson as guest with various university and college jazz bands.
Arrangement:
Collection is divided into four series.
Series 1: Music
Series 2: Original tapes and recordings
Series 3: Photographs
Series 4: Miscellaneous
Biographical/Historical note:
Cat Anderson (Sept 12, 1916 - April 29, 1981) was one of the premier trumpet players of the Duke Ellington Orchestra. Known for his effortless high notes, he was a strong section leader and a great soloist whose style exhibited humor and precision. He grew up in Jenkins= Orphanage in Charleston, SC, received basic music training there, and participated in many of their famous student ensembles. He formed and played with the Cotton Pickers, a group of orphanage teens while still a young man. Before joining Ellington in 1944, he played in several big bands, including Claude Hopkins and Lionel Hampton. Anderson left the Ellington organization from 1947 through 1949 again to lead his own group. From 1959 to1961 and after 1971 Anderson free lanced, working with the Ellington orchestra intermittently. He died in 1981 after receiving honors from the US Air Force, the Prix du Disque de Jazz, and the City of Los Angeles.
Related Archival Materials:
Related artifacts include: awards, plaques, mutes, trumpet mouth pieces, and the Jon Williams/Cat Anderson simulator in the Division of Cultural and Community Life (now Division of Cultural and Community Life). See accession: 1998.3074.
Provenance:
The collection was donated to the National Museum of American History in January 1998, by Dorothy Anderson, Cat Anderson's widow. It was acquired through negotiations with her, her brother, Mr. John Coffey and her nephew, Andrew Brazington. The materials were picked up from Mr. John Coffey of upper N.W. Washington, DC on January 21, 1998.
Restrictions:
Collection is open for research. Master tapes not available to researchers.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions.
Copyright status of items varies. Signed copies of releases on file.
The collection consists of over thirty hours of 7" open reel-to-reel master tapes, compact discs (DVDs), and transcripts for oral histories documenting the invention and development of the analogue music synthesizer.
Scope and Contents:
The collection consists of over thirty hours of 7" open reel-to- reel master tapes, compact discs, and transcripts for the oral histories documenting the invention and development of the analogue music synthesizer. Not all interviews have master tapes, reference copies, or transcripts.
Arrangement:
Collection is arranged into three series.
Series 1: Transcripts, 1996-1998
Series 2: Reference Disks (DVDs), 1996-2000
Series 3: Master Tapes (7"), 1996-1998
Biographical / Historical:
The Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation, in cooperation with Trevor Pinch and Frank Trocco of Cornell University, conducted oral histories to document the pioneering engineers and musicians of the electronic music synthesizer from 1960 to 1970. Pinch and Trocco authored in 2002, Analog Days: The Invention and Impact of the Moog Synthesizer by Harvard University Press. This book is based on the oral histories from the Analogue Music Synthesizer Oral History Project.
Provenance:
This collection was created by the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation with National Museum of American History staff member Jim Weaver, Division of Cultural History and Trevor Pinch and Frank Trocco, Department of Science and Technology Studies, Cornell University.
Restrictions:
Collection is open for research use.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions.
Lawrence Berkeley National Laboratory. Search this
Extent:
0.5 Cubic feet (5 boxes)
Type:
Collection descriptions
Archival materials
Videotapes
Oral history
Interviews
Date:
1998 January 16
1998 April 28
1996 - 1996
Summary:
Original, master, and reference videos documenting an Innovative Lives presentation and interview with Ashok Gadgil, inventor of the UV Waterworks disinfectant unit.
Scope and Contents:
This collection contains original, master, and reference videos, and audio cassettes documenting Ashok Gadgil, inventor of the UV Waterworks, a water purifier.
Arrangement:
The collection is divided into four series.
Series 1: Original videos, 1998
Series 2: Master Videos, 1998
Series 3: Reference Videos, 1998
Series 4: Photographs and Slides, 1998
Biographical / Historical:
Ashok Gadgil, was born in India and is a physicist at the Lawrence Berkeley National Laboratory in California. Gadgil invented the UV Waterworks, a water purifier that provided reliable, inexpensive water disinfection for the world. The UV Waterworks uses ultraviolet light to kill waterborne pathogens (bacteria, viruses, and molds) and thus purify drinking water. The key to this invention is the effect ultraviolet light has on bacteria and viruses--it triggers the formation of peptide bonds between certain nucleic acids in the pathogens' DNA molecules, which robs them of the ability to reproduce and renders them harmless. Water, powered by gravity, flows down through pipes, passing into a tray where it is exposed to twelve seconds of ultraviolet light before it flows out a spigot. Gadgil used sheet metal, UV lamps, and stainless-steel piping to create this invention.
Separated Materials:
UV Water Works Disinfectant unit is located in the Division of Medicine and Science. See accession #: 1998.0158.01.
Provenance:
This video presentation and interview was created by the Innovative Lives Program of the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation on April 28, 1998.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions.
The records of Wedge Innovations document the invention and development of a new hand tool, the SmartLevel, an electronic builder's level; also included are company management and policies.
Scope and Contents:
The SmartLevel story gives excellent insight into the life cycle of a small Silicon valley start-up in the 1980s. SmartLevel's creator, Wedge Innovations, established a market for a new product, achieved national distribution, off-shore manufacturing, and product licensing, before going out of business due to pressure from profit-hungry venture capitalists.
The records of Wedge Innovations is a "tool biography" that documents the invention and development of a new hand tool, the SmartLevel, an electronic builder's level first conceived in 1985 by Andrew Butler. The SmartLevel Collection is divided into seven series: Corporate Records, Engineering Records, Financial Records, Marketing Records, Operations Records, Product Development Records, and Corporate Culture, reflecting both the organizational structure of Wedge Innovations and the company's working environment.
Series 1, Corporate Records, 1985-1993, address the overall management of Wedge Innovations and document its policies, especially through the company's annual business plans, 1986-1992, and the monthly reports prepared for the Board of Directors' meetings, 1989-1992. This series also details the workings of each department through weekly departmental reports. The staff meetings files, July-November 1989, February 1990-November 1992, are particularly useful for understanding the day-to-day operation of the company.
Series 2, Engineering Records, 1985-1993, document the design and development of the SmartLevel from its conception in 1985 as the WedgeLevel, through its production as the SmartLevel in 1989, and through its refinement into the Pro SmartLevel and the Series 200 SmartLevel in 1991. The design process is particularly well documented through Andrew Butler's and Kevin Reeder's design notebooks and through the detailed technical drawings done by Butler, Reeder, and Ronald Wisnia. Also well documented are the efforts made to solve the many problems associated with the development and quality control of the electronic sensor module that was the heart of the SmartLevel.
Series 3, Financial Records, 1985-1992, include Wedge's summary financial statements from 1985 to 1992.
Series 4, Marketing Records, 1986-1992, document customer and dealer relations through marketing department correspondence, operational records, and advertising campaigns. This series is particularly rich in promotional material (1988-1992), such as advertisements, advertising copy, photographs, product promotion plans, and videotapes that demonstrate the varied features and uses of the products.
Series 5, Operations Records, 1990-1993, document the manufacturing process and the Company's offshore operations.
Series 6, Product Development Records, 1986-1993, document the company's intended development of an entire "Smart Tools" line.
Series 7, Corporate Culture, 1985-1996, contains employee photographs and oral history interviews with key Wedge personnel conducted in 1995 and 1996 by David Shayt, Division of Work and Industry, National Museum of American History. The interviews discuss the background of the participants, the company's origins and history, product development, the Silicon Valley context, and the efforts of Wedge Innovations successor firm, SmartTool Technologies.
Arrangement:
The collection organized into seven series.
Series 1, Corporate Records, 1985-1993
Series 2, Engineering Records, 1985-1993
Series 3, Financial Records, 1985-1992
Series 4, Marketing Records, 1986-1992
Series 5, Operations Records, 1990-1993
Series 6, Product Development Records, 1986-1993
Series 7, Corporate Culture, 1985-1996
Biographical / Historical:
Andrew G. Butler (b. 1955), the founder of Wedge Innovations exhibited an interest in building construction and an entrepreneurial spirit early in life. From age 12 to 17 he built a boat that he then sailed alone from California to Tahiti, where he spent several years as an independent carpenter and building contractor. After returning to the United States, he earned a B.S. degree in electromechanical engineering from Stanford University (1983) and became a software specialist for Bechtel Construction. In 1985, he conceived of an idea for an electronic carpenter's level that could read a range of angles. Butler formed Wedge Innovations in 1986. He worked in the basement of his home in order to develop and market this level, selling his boat to finance the venture. He hired Marilyn Crowell as his secretary and Robert Nagle and Dan Kellogg as engineers. This company developed the sensor technology and software necessary to build the company's first product, the WedgeLevel. The heart of this tool was an electronic sensor circuit connected to a microprocessor capable of measuring the tool's orientation. This sensor module fit into an ergonomically-designed teak rail with anodized aluminum edges jointly developed by Butler, engineering design consultant Kevin Reeder, and engineer Ronald Wisnia.
In 1987, Wedge moved to Santa Clara to begin manufacturing the WedgeLevel. The transition from a research and development concern to a manufacturing company proved difficult, due to manufacturing and financial difficulties. It was difficult to obtain a reliable yet inexpensive source of teak for the rails, designs for a plastic composite and aluminum rail were developed, while offshore manufacturing of the sensor components was established. Overarching all concerns was the persistent difficulty of obtaining sufficient investment capital. While managing his growing company, Butler also began planning for a line of hand tools that combined microelectronics and user-oriented, ergonomic design. In 1988, the company changed the name of its product to SmartLevel in order to emphasize the company's proposed line of Smart Tools. That same year, the company adopted a new corporate logo, a stylized W with a red wedge, signaling its growing maturity. Promotion of the product also began through demonstrations of the prototype done by consultant building contractor, Rick Feffer.
In January 1989, the SmartLevel prototype was launched at the National Association of Home Builders Show in Atlanta, Georgia. The favorable publicity generated by this launch and by the company's media campaign generated many orders. To supply these orders, Wedge moved to larger quarters in Sunnyvale on April 1, 1989. In June 1989, Wedge gained further publicity by donating several SmartLevels to a Habitat for Humanity project in Milwaukee, where former president Jimmy Carter used one. Although Wedge expected to ship the first SmartLevels in July 1989, there were considerable delays in manufacturing. In particular, there were stability and performance problems with the sensor, which engineer Ken Gunderson was brought in to remedy. The sensor module was re-engineered to be more rugged and the level was redesigned with a plastic composite and aluminum rail. The new level, known as the Pro SmartLevel, was intended for the professional construction market. The first SmartLevels were shipped on September 5, 1989.
In 1990, patents were granted to Andrew Butler, Donald G. Green, and Robert E. Nagle for an inclinometer sensor circuit and to Butler and Ronald Wisnia for a carpenter's level design. That same year, Brian Bayley joined Wedge as Vice-president for Engineering, and Edwin "Win" Seipp joined as Project Manager - DIY SmartLevel. Seipp's responsibility was to develop a low-cost, "do-it-yourself" version of the SmartLevel, which was eventually called the Series 200 SmartLevel. This level had an all-aluminum rail and a non-removable sensor.
In September 1990, the company moved to San Jose and by 1991 had over 60 employees. Although sales continued to grow and name recognition of the product was quite strong, Wedge had difficulty meeting the expectations of its investors. Butler entered into financial negotiations with the Macklanburg-Duncan Corporation, a large-scale manufacturer of hand tools, to seek investment in his company. These negotiations led in November 1992 to the acquisition of Wedge by Macklanburg-Duncan, which dissolved all but Wedge's engineering section. Macklanburg-Duncan today manufactures a "SmartTool" level, while Butler co-owns D2M (Design To Market), a company that develops new product ideas for the market.
SmartLevel Chronology
1992 -- Butler negotiates with Macklanburg-Duncan for a merger to save Wedge. In the midst of the negotiations, Butler is fired by his Board of Directors. Butler regains control of Wedge three months later, fires the replacement president, and sells Wedge outright to Macklanburg-Duncan, which dissolves all but the engineering functions of Wedge.
1991 -- Wedge sponsors a "New Product Development Conference," where numerous designs for new hand tools are worked on. SmartLevel sales and name recognition grows but not quickly enough to meet overhead expenses of new facility or investors' demands.
1990 -- Yet more redesign work, both in-house and with Kevin Reeder, who also develops idea for "SmartTube" carrying case (not built). Patents granted to Andy Butler et al. for inclinometer sensor circuit and carpenter's level design. Wedge hires Brian Bayley as vice-president for engineering to develop a low-cost model of the SmartLevel. The all-aluminum Series 200 SmartLevel is born. Wedge moves to larger facilities in San Jose.
1989 -- SmartLevel launched at National Association of Home Builders show in January. Good press coverage, but cannot meet orders. More publicity from Habitat for Humanity project when former President Jimmy Carter uses a SmartLevel. But stability and performance problems plague sensor. More redesign work results in more rugged Pro SmartLevel. The first SmartLevels shipped on September 5, 1989.
1987-1988 -- Wedge moves to Santa Clara; intends to begin manufacturing and todevelop an entire line of "Smart Tools" but encounters financial and engineering difficulties; Wedge consults with independent design engineer, Kevin Reeder, on level design. Intensive redesign effort develops the SmartLevel, made of plastic and aluminum rail.
1986 -- Wedge Innovations founded in the basement of Butler's house; basic sensor design worked out; teak & aluminum WedgeLevel developed.
1985 -- Idea for electronic carpenter's level formulated by Andy Butler.
Related Materials:
Materials at the National Museum of American History
The Division of Work and Industry, National Museum of American History contains artifacts related to the SmartLevel Collection. These include five SmartLevels (Accession #1991.0823; 1996.0284; 1996.0285; 1996.0288; and 1996.0289). They are an original teak WedgeLevel, a Pro SmartLevel, a Series 200 SmartLevel, a Bosch version of the SmartLevel, and a Macklanburg-Duncan SmartTool level. There are also four sensor modules (torpedo levels), two sensors, two carrying cases, one cap, one tee shirt, and one wooden puzzle with the inscription "The World Isn't Just Level and Plumb."
Provenance:
The collection was donated by Andrew Butler, SmartLevel inventor and company founder, Brian Bayley, Vice-President for engineering at Wedge Innovations from 1989-1992, and Kevin Reeder, an independent industrial designer, 1995-1997.
Restrictions:
The collection is open for research use.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning intellectual property rights. Archives Center cost-recovery and use fees may apply when requesting reproductions.
Records relating to Small Beginnings, Inc., a medical supply company that designs, invents, manufactures, and distributes products for premature infants. The records include contacts with distributors, correspondence, product advertisements, patent and trademark files, photographs, a scrapbook, and oral history interviews with Kenneth S. Croteau, Mary S. "Sharon" Rogone, and Philip N. Rogone.
Scope and Contents:
Series 1, Background Information, 1983-2006, is divided into nine subseries and includes articles of incorporation for the business, correspondence, corporate identity branding, and journal articles and magazine and newspaper clippings about Small Beginnings, Inc. The correspondence consists of thank you letters from hospitals and medical centers for visits made by Small Beginnings staff during the holiday season and a September 2001 letter from Kenny Loggins discussing his partnership with Small Beginnings to distribute his CD "More Songs from Pooh Corner." The Entrepreneur packet was created by Kenneth Croteau of Caring Creations, Inc., to assist potential inventors/entrepreneurs in developing ideas into a patented product and bringing it to the marketplace.
Series 2, Oral History Interviews and Logs, 18 January 2007, is divided into two subseries. Subseries 1 contains reference CD-ROM copies for listening and Subseries 2 consists of master CD-ROMs. The interviews were created digitally using a Marantz PMD 660 recorder. The oral history interviews were conducted by National Museum of American History staff members Maggie Dennis and Judy Chelnick. The interviewees include Kenneth S. Croteau, Mary S. "Sharon" Rogone, and Philip N. Rogone, founders of and business partners in Small Beginnings, Inc. Each interview has a time code log. Full text transcripts do not exist.
Series 3, Product Information, 1994-2006, is divided into four subseries.
Subseries 1, Small Beginnings, Inc. Products, 1998-2004, contains documentation on the products made available by Small Beginnings, Inc. The company offers a wide variety of products for neonatal intensive care units and newborn nurseries. This subseries is arranged alphabetically by product name. The bulk of the documentation consists of printed product literature that was disseminated to distributors and/or at conferences. In some instances, such as the Bili-Bonnet, Climate Cover, and Pacee Pacifier—correspondence, testing information, and sketches exist.
Subseries 2, Disclosure Statements, 2000-2003, contains waivers and agreements between Small Beginnings, Inc., and individuals which state that an idea or ideas will not be used or revealed to others.
Subseries 3, Competitors, 1994-2004, includes files on competitors in the neonatal medical supply business. The documentation is primarily product literature and company overviews. The subseries are arranged alphabetically by company name.
Subseries 4, Miscellaneous, 1999, 2001, undated, contains printed paper examples of the fabric Small Beginnings used on its products and a Neonatal Intensive Care Unit (NICU) booklet designed for parents of preemie infants. The booklet provides a checklist of tasks for parents to be conscious of when caring for their premature infant.
Series 4, Sales Records, 1993-2006
Subseries 1, Catalogs, 2001-2005, contains catalogs in hard copy and on CD-ROM for distributors and other interested parties.
Subseries 2, Price lists, 2000, 2003, undated, includes itemized pricing lists for all Small Beginnings products and special pricing lists designed for hospital admission kits. There is also a pricing list with similar competitor products and the savings gained by using Small Beginnings products.
Subseries 3, Distributor Information, 1993-2006, consists of documentation on distributors around the United States who are distributing or considering distributing Small Beginnings, Inc., products. Arranged alphabetically by the name of the distributor, this subseries consists primarily of contracts—the independent distributor contract—between Small Beginnings, Inc., and the distributor.
The contract details the sales representatives appointment, terms, permitted sales, distributor sales and service obligation, supplier organizations, prices, orders, payment, shipment, trademark protection, no competitive products, proprietary rights protection, warranty, disclaimer, and warrant service, limitations or remedies and liability, termination, taxes, duties, import permits, approvals, and general provisions. In some instances, there is correspondence with a distributor and sales report information detailing the product type, cost and to which hospital it was sold.
The Advanced Medical Systems file also contains vendor sales information. This report details what Small Beginnings product(s) were sold, to whom, when, how many, the price, and any shipping details.
The HealthTrust file documents a "purchasing group." A purchasing group negotiates with suppliers to provide member facilities with high quality supplies, equipment, and other services at competitive prices through national, regional and local supply agreements. Small Beginnings did not enter into a formal agreement with HealthTrust but explored the idea of becoming a prospective vendor.
Subseries 4, Licenses and Agreements, 1998-2005, includes license and compensation agreements with five individuals (Eileen Clayton, Linda Cook, Diane D'Eugenio, Ilija Kainovic, and Kathleen Porter) for a variety of products. The agreements cover the definitions, license grants, royalties and payments; term and termination; best effort; breach and cure; patent, applications, prosecution and ownership; new inventions; infringement; representations by the licensee; force majeure; and other rights and conditions.
There are also letters of agreement for purchase and compensation documents. These agreements between Small Beginnings, Inc., and said party states what the product/idea is, how much it will cost, if the product/idea will be commercially produced and marketed, and if the product/idea can be altered. There is one agreement among the officers of Small Beginnings, Inc., dated 1999 which states that any and all future intellectual property(s) and/or product(s) and/or idea(s) shall be the property of the individual and not Small Beginnings, Inc.
Subseries 5, Finances, 2000-2003, contains sales summary data, expense allocations, invoices, and cost analyses. The sales summary provides an itemized breakdown of Small Beginnings's inventory for the period January 1, 2000 to July 10, 2000. The expense allocation spreadsheet of January 2000 to July 2000 provides a detailed breakdown of salary payments, office equipment, goods sold, and other line items such as printing, attorney's fees, and shipping supplies. Also provided is the total actual expenses, total income, difference, and starting and ending balance information. The invoice reports provide information about the customer, the invoice number, date due (0-30 days, 31-60 days or 61-90 days or over 90 days), amount due, purchase order number and the date paid. The projected cash flow from January 2000 to May 2000 details the amount of cash taken in and cash spent. The cost analyses provide a breakdown by list price, materials, manufacturing, labor costs, and packaging for six products: Bili-Bonnet, Climate Cover, Iso-sphere Covers, Baby-Crates, Security Baby Wrap, and Baby Blotters, Preemie Swaddler, Preemie Gown, Privacy Poncho, Bed Buddie, Posture Pillow, Preemie Nest, Bebeonkers and Pacee Pacifier.
Subseries 6, Neonatal Conference Programs, 1998-2002, consists primarily of conference programs and, in some instances, only the program cover.
Subseries 7, American Hospital Association Guide (partial), 1998, contains a partial print out of hospitals located in Indiana, Kentucky, Michigan, and Ohio.
Series 5, Patent and Trademark Files, 1991-2002, contains copies of patent and trademark information relating to Small Beginnings, Inc., products. The trademark file includes documentation with the law firm of Townsend and Townsend and Crew LLP and the United States Patent and Trademark office for Small Beginnings, Peeweeonkers, Bebeonkers, Nasalonkers (all infant nasal suction devices), and Doctor Nurse Apparel, (DNA) trademark logos. The patent files contain correspondence, drawings and narrative text for Bebeonkers, Bili-Bonnet, Climate Cover, Pacee Pacifier, Positioning Device, Preemie Nest, and Privacy Poncho.
Series 6, Photographs and Scrapbook, 1987-2007
Subseries 1, Photographs, 2000-2001, are arranged by topic and include color and color photocopies documenting some of Small Beginnings products, a 2001 Christmas party, a 2000 neonatal conference, and office and factory images.
Subseries 2, Digital images, 2007, consists of office, factory and employee images taken by National Museum of American History staff members Judy Chelnick, Maggie Dennis, and Alison Oswald.
Subseries 3, Scrapbook, 1987-2000, consists of nineteen pages featuring photographs of employees, products and the factory, as well as printed product information.
Arrangement:
The collection is organized into six series.
Series 1, Background Information, 1983-2006
Subseries 1, Articles of Incorporation, 1997-2005
Subseries 2, Small business certification, 2006
Subseries 3, Women's Business Enterprise Council, 2004-2006
Subseries 7, American Hospital Association Guide (partial), 1998
Series 5, Patent and Trademark Files, 1991-2002
Series 6, Photographs and Scrapbook, 1987-2007
Subseries 1, Photographs, 2000-2001
Subseries 2, Digital images, 2007
Subseries 3, Scrapbook, 1987-2000
Biographical / Historical:
Small Beginnings, Inc., of Hesperia, California, was founded by Mary S. Rogone and her business partner, Austin J. Webber, II in the late 1990s. It officially incorporated on November 21, 1997, in the State of Nevada. The company specializes in products conceived and developed by healthcare professionals, specifically nurses who work with premature infants. The name "small beginnings" originated from the small amount of money used to start the company and for the tender age of the patients it serves. The company motto is "Clinicians on a Mission" with the entire company dedicated to making better, more innovative products for premature infants.
Mary Sharon Shoffstall was born August 8, 1942 and raised in the San Bernardino Hills of California. She attended Huntington Park High School where she concentrated on math and science and graduated in 1960. She earned degrees as a licensed practical nurse (LPN) in 1976 and as a registered nurse (RN) in 1980 from San Bernardino Valley College. Rogone worked a variety of nursing jobs—labor and delivery and surgical—but found her niche in the neonatal intensive care unit (NICU).
In the late 1980s, Rogone was motivated by her work in the neonatal intensive care units at St. Bernardine's Hospital (now St. Bernardine Medical Center) and San Bernardino County Hospital in California to create a better phototherapy mask for premature infants suffering from bilirubin. "Bilirubin is a brownish yellow substance found in bile. It is produced when the liver breaks down old red blood cells. The most obvious symptom of high bilirubin levels is jaundice, a condition in which the skin and whites of the eyes appear yellow. Therefore, some babies who develop jaundice may be treated with special lights (phototherapy) or a blood transfusion to reduce their bilirubin levels."
Rogone's phototherapy mask was fashioned out of a variety of hospital materials and was designed to take the pressure off the ocular socket, transfer it to the cheekbone and reduce the ability of light to penetrate the mask. With no objections from fellow nurses or doctors, Rogone developed the Bili-Bonnet Phototherapy Mask and began using it on infants in the NICU. Encouraged by Austin Webber, a medical sales representative she met at the hospital, Rogone formed a financial partnership with Webber. Both Rogone and Webber contributed $1,500.00 to start the business. Webber provided knowledge about materials, manufacturing processes, and distribution while Rogone supplied the ideas and medical background. Rogone began the patent process for the mask in 1992 and was granted US Patent # 5,613,502 for a "Photo therapy eye mask" in 1997. This invention launched Rogone's inventive career and her company, Small Beginnings, Inc.
In 1995, Sharon married Phil Rogone, a respiratory therapist and physician's assistant she met while working at St. Bernardine's Hospital. Phil soon joined the company as Vice President for Marketing and began attending tradeshows to promote the company's growing line of products. In 1998, Ken Croteau, a respiratory specialist and close friend of Phil and Sharon's, joined the staff of Small Beginnings, Inc., as the business manager. Croteau established the company's website, www.small-beginnings.com, and began to recruit distributors. Croteau, along with Sharon Rogone, Philip Rogone, Winnifred Croteau, and Ted Lopez founded Caring Creations, Inc., a separate corporation on May 1, 2002. Caring Creations, Inc., is a vehicle intended to launch Small Beginnings products into the retail market. By 2000, Sharon Rogone left full-time nursing to focus on the company as Chief Executive Officer.
As the company grew, more products were developed. The company now offers: Bebeonkers (oral suction device), Lil' and Nu' Pacee Pacifiers, Cuddle Buns™ Diapers; Preemie Nest (swaddler and positioning device); Bed Buddy (positioning device); Baby Blotters (absorbent, moisture proof plastic blotters); Abdominal Pillow; Head Pillow; Wedge Pillow; Preemie Gown; Arm immobilier; Baby Crates™ (allows moisture to flow through and away from the baby), Baby Blankee™; Isosphere™ covers (for NICU warmers); Universal Climate Cover II, and the Privacy Poncho.
Not all products are developed and patented by Small Beginnings, Inc. The company inspires and assists budding inventors, especially nurses and other healthcare professionals to realize their dreams. The Pacee Pacifier sold by Small Beginnings (US Patent # 4,909,253) was invented by Linda L. Cook from Infrapreem, Inc., of Connecticut. Cook licensed her invention to Small Beginnings in 1999 so they could commercially develop, produce and market the pacifier as the Lil' and Nu' Pacee Pacifier. In a 1998 letter Cook wrote to Rogone, "It is so good to know there are people like you in the world that are out there to help nurses. Thank you." Other products, such as the Cuddle Buns™ Diapers, are not patented, but the name is trademarked.
Related Materials:
Materials at the National Museum of American History
The Division of Medicine and Science holds artifacts related to this collection. See Accession # 2007.0022:
Bili-Bonnet mold with masking tape
Bili-Bonnet mold with foam inserts
Pacifier choking test stand (includes barbell and pacifier)
Pac black foam disk
Diapers from Children's Medical Ventures
Diaper, prototype 1 from Mexico, Small Beginnings, Inc.
Diaper, prototype 2 from Mexico, Small Beginnings, Inc.
Diaper, prototype 3 from Mexico, Small Beginnings, Inc.
Diaper, prototype 4 from Mexico, Small Beginnings, Inc.
Diaper, prototype 5, Small Beginnings, Inc.
Diaper, final version production model
Diaper, ultra preemie production model, 2003
Diaper, Pampers Preemie Swaddler from Procter & Gamble
Oral suction device, Bebeonkers
Pacifier, Original Pacee with product literature, Small Beginnings, Inc.
Pacifier, second generation with packaging, Small Beginnings, Inc.
Pacifier, Competitor's "Soothie" Children's Medical Ventures
Pacifier "Lil' Pacee," Small Beginnings, Inc.
Phototherapy mask, competitors, Children's Medical Ventures
Phototherapy mask, Bili-Bonnet #1, Small Beginnings, Inc.
Phototherapy mask, Bili-Bonnet #2, Small Beginnings, Inc.
Phototherapy mask, Bili-Bonnet #3, Small Beginnings, Inc.
Packaging, new Bili-Bonnet, Small Beginnings, Inc.
Packaging, old Bili-Bonnet, Small Beginnings, Inc.
Phototherapy mask, original preemie Bili-Bonnet, Small Beginnings, Inc.
Posture pillow sets for preemies, Small Beginnings, Inc.
Bed Buddy 36" for ultra preemies, Small Beginnings, Inc.
Preemie nest set, Small Beginnings, Inc.
Bendy Bumpy, Children's Medical Ventures
Bulb syringe "Adult Yankauer," taken from NICU
Suction tube with collecting bottle, Delee taken from NICU (for use after c-section)
Bulb and syringe, taken from NICU
Catheter, size 6 cut, for suction, taken from NICU
Catheter for oral and nasal use (by Ballard)
Pen, Small Beginnings, Inc.
Phototherapy mask, original ultra preemie, cat #OIC 38, Small Beginnings, Inc.
Pacifier, 'Nu' Pacee" in packaging, Small Beginnings, Inc.
Provenance:
The collection was donated by Small Beginnings, Inc., through Mary S. Rogone, Philip N. Rogone, Austin J. Webber II, Kenneth S. Croteau and Winnifred D. Croteau, February 2007.
Restrictions:
The collection is open for research use.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning intellectual property rights. Archives Center cost-recovery and use fees may apply when requesting reproductions.
Original audio cassettes and transcripts of oral history interviews with individuals involved in the transportation industry known as containerization. Arthur Donovan was the principal interviewer.
Arrangement:
The collection is ivided into two series.
Serties 1: Audio cassettes, 1995-1998
Series 2: Transcripts, 19956-1998
Biographical / Historical:
This project consists of oral history interviews with individuals who initiated and implemented the post-World War II revolution in the transportation industry known as containerization. This technological and organizational revolution, a product of American innovation and entrepreneurship, has transformed the way cargos are loaded and moved on ships, trains, trucks, and barges. The introduction of trailer-sized containers as the units for loading cargo abroad ships has transformed commercial shipping. Loading items abroad ship in boxes, barrels, and bags, a system known as break-bulk, was replaced by containerization. Containerization is one of the fundamental technologies in modern society.
Provenance:
Commissioned for the National Museum of American History.
Restrictions:
Collection is open for research.
Original audio cassettes not available to researchers.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions.
This collection contains 5 1/2 hours of footage documenting Sally Fox, an inventor of a commercially spinnable naturally colored cotton. This video was created on November 14, 1997.
Arrangement:
The collection is divided into four series.
Series 1: Original Videos, 1997
Series 2: Master Videos, 1997
Series 3: Reference Videos, 1997
Series 4: Photographs, 1997
Biographical / Historical:
Sally Fox began growing brown cotton in 1982 and experimented with crossbreeding it. By 1985, some of Fox's plants growing from cross-pollinated seeds produced green cotton as well as brown. These naturally colored cottons were brought to the marketplace in 1989, when Fox established her company, Natural Cotton Colours, Inc., in Arizona. FoxFibre is the registered trademark of her naturally colored cotton. Fox developed several different types and colors of cotton--pink, yellow, lavender, brown, green, and red. Crossbreeding two types, reddish-brown Coyote and traditional white Pima produces the bronze brown Buffalo FoxFibre. The six varieties of FoxFibre include three browns: Coyote (reddish), Buffalo (mocha), and New Brown; and three greens: Green FoxFibre, Palo Verde (sage), and New Green. FoxFibre is naturally colored, so there is need to bleach or dye the fabric. The Coyote and Buffalo FoxFibre are naturally flame resistant. FoxFibre is environmentally friendly because it is grown organically, without the use of chemical pesticides.
Provenance:
Created by the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation on November 14, 1997.
Restrictions:
Collection is open for research.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions. Copies of release forms exist.
This collection contains original videos documenting Chuck Hoberman, inventor the Hoberman Sphere.
Scope and Contents note:
Original videotapes documenting Chuck Hoberman, inventor of expandable geodesic domes and spheres. Hoberman invented the Hoberman Sphere, Iris Dome, and a collapsible frisbee, tent and briefcase.
Arrangement:
The collection is arranged into three series.
Series 1: Original Videos
Series 2: Reference Videos
Series 3: Photographs and Slides
Biographical/Historical note:
Chuck Hoberman was born in 1956 and attended Brown University and holds a B.F.A. from Cooper Union and a M.S. in Mechanical Engineering from Columbia University. He also holds four patents on ways to pleat sheets (of metal, plastic, or paper), and two patents on truss structures (structures that are based on series of triangles joined together). Hoberman has built expandable geodesic domes and spheres, including a motorized geodesic sphere that expands from 4.5 feet in diameter to 18 feet in diameter. Another dome, the "Iris Dome," could be used for emergency shelters and portable exhibition spaces. He named the dome after the iris of an eye, which also expands and contracts proportionally. Besides the Iris Sphere and a small toy called the Hoberman Sphere, Chuck Hoberman has invented a collapsible frisbee, a collapsible tent, and a collapsible briefcase. Hoberman combines aesthetics (the art of making things look pleasing to the eye) with engineering with problem-solving. His intriguing creations, based on both basic geometry and complex mathematics, solve problems or offer opportunities in the real world. In 1990, he founded his own company, called Hoberman Associates, Inc.
Provenance:
This collection was created by the Innovative Lives Program of The Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation on May 8, 1996. The Innovative Lives series brings young people and American inventors together to discuss inventions and the creative process and to experiment and play with hands-on activities related to each inventor's product.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions. Signed copies of release on file.
Collection documents inventor Akhil Madhani and his invention, the Black Falcon, a teleoperated surgical instrument.
Arrangement:
Series 1: Original videotapes
Series 2: Master Videotapes
Series 3: Reference Videotapes
Series 4: Digital Images
Provenance:
Created by the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation, National Museum of American History, 1999.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions. Copies of signed releases on file.
Topic:
Surgical instruments and apparatus -- 1990-2000 Search this
Videotaped interview with Charles Townes, inventor of the MASER (Microwave Amplification by Stimulated Emission of Radiation). The interview was part of the "Innovative Lives" public program series. Videotapes include VHS and Beta Cam SP formats.
Arrangement:
Divided into four series.
Series 1: Original videos
Series 2: Master videos
Series 3: Reference videos
Series 4; Digital images
Biographical / Historical:
Charles Townes was born in Greenville, S.C., July 28, 1915. Graduated from Furman University (1935), Duke University (1936), and the California Institute of Technology (Ph.D., 1939). Appointed to faculty of Columbia University, 1948, where he conceived the idea for the maser. Received Nobel Prize for physics for advances in quantum electronics, 1964.
Provenance:
Created by the Jerome and Dorothy Lemelson Center for the Study of Invention and Innovation, National Museum of American History, 1998.
Restrictions:
Collection is open for research but the original videos are stored off-site and special arrangements must be made to work with it. Contact the Archives Center for information at archivescenter@si.edu or 202-633-3270.
Rights:
Collection items available for reproduction, but the Archives Center makes no guarantees concerning copyright restrictions. Other intellectual property rights may apply. Archives Center cost-recovery and use fees may apply when requesting reproductions. Signed oral history releases on file.
